angle of inclination

美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]
  • 倾斜角
angle of inclinationangle of inclination

noun

1
(geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
Synonym: inclination

数据来源:WordNet

  1. Application and future of a new type belt conveyor with a large angle of inclination

    带式输送机胶带运行偏斜的解决办法新型大倾角胶带运输机的应用与前景

  2. The research of regulative method on angle of inclination of straightener

    矫直辊倾角调整方法的研究

  3. Please consult with your local supplier about the best angle of inclination .

    关于最佳倾斜角度的具体信息,请咨询当地的经销商。

  4. Research on relationship between bone traction and angle of inclination of cross section of shaft bone fracture

    骨干骨折断面倾角与骨牵引关系的探讨

  5. Angle of inclination of conveyor in degree .

    为皮带运输机的倾角,度;

  6. An instrument used by surveyors in order to measure an angle of inclination or elevation .

    用来测量倾斜角的测量员使用的装置。

  7. Results The point A moved forward , and the angle of inclination of maxillary incisor increased .

    结果A点前移,上前牙唇向倾斜;

  8. Experimental results show that by using an optimal angle of inclination energy losses can be reduced and outlet flow fields improved .

    实验结果表明:采用最佳倾斜角叶片能降低叶栅能量损失和改善叶栅出口流场的气动性能。

  9. A novel routing protocol was proposed according to the angle of inclination of the nodes involved in wireless sensor network .

    根据无线传感器网络中每个节点到汇聚节点的角度不同,提出一种新的角度路由协议。

  10. The main function of the inclinometer is to measure the angle of inclination 、 azimuth and tool face angle .

    随钻测斜仪的主要作用是完成井斜角、方位角、工具面角等参数的测量。

  11. The results of the analysis could play a important role in prediction of herringbone buckling and its angle of inclination on strip rolling line .

    研究结果可为板带材轧制过程中倾斜浪及其倾斜角度的预测和控制提供理论依据。

  12. Lower and raise the ramp to see how the angle of inclination affects the parallel forces acting on the file cabinet .

    把斜坡抬高或放低,看倾斜角度如何影响文件盒上的平行作用力。

  13. Methods The location , degree and angle of inclination of lumbar facet joints were measured in 125 cases with 131 spondylolisthesis .

    方法对125例131个滑椎的滑脱部位、程度及滑椎小关节面倾斜角进行测定。

  14. It can be see from the measured data that the deviation angle of inclination is about 1 40 °, slightly exceeding the permitted value .

    现场检测数据显示,该抗风柱基础施工偏差略大于允许值,连接抗风柱的垫板约有140°倾斜。

  15. Any of numerous hand tools for boring holes . Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination

    钻孔工具,手钻钻孔用的手持工具反井钻开挖大倾角斜井导孔的工程实践

  16. The static stability of offshore platform with bucket foundation is analyzed theoretically , and stability analyzed methods of the platform with small and large angle of inclination are discussed .

    对筒形基础海洋平台的静稳性进行了理论分析,提出了平台在大、小倾角两种情况下的稳性分析方法。

  17. The effect of angle of inclination at the interface of a viscous fluid and thermoelastic micropolar honeycomb solid due to inclined load is investigated .

    研究倾斜荷载作用在黏性流体与热弹性微极蜂窝结构固体界面上时,荷载倾斜角的影响。

  18. Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts

    反井钻开挖大倾角斜井导孔的工程实践大倾角斜井长曲线提升机运输施工技术

  19. Through the digital simulation of elevation , the author holds that the baseline angle of inclination measurement error is the important factor when designing Space-Bome InSAR system .

    通过对高程精度数字仿真得出,基线倾角量测误差是设计星载InSAR系统需重点考虑的因素。

  20. The angle of inclination from the vertical of a vein , fault , or lode . Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts

    倾斜余角因矿脉,断层或矿井倾斜而与垂直面形成的角度大倾角斜井长曲线提升机运输施工技术

  21. A surveying instrument consisting of a spirit level and a sighting tube ; used to measure the angle of inclination of a line from the observer to the target .

    由一个水平仪和一个观测管组成的测量工具;用来测量从观测者到目标的直线的倾斜角。

  22. The emphasis of the analysis is put on the effects of the angle of inclination of the concentrated force upon the deformed shape , the load-deflection relationship and the length of the plastic region .

    着重讨论了集中力的倾角对弯曲形状、载荷&挠度关系及塑性区长度的影响。

  23. The trainer can provide learners the simulant melting rate of electrode , check up whether the moving rate of electrode and the angle of inclination of electrode are in the ranges set in advance .

    该装置能给学员提供焊条摸拟熔化速率,能检测焊条移动速率、焊条倾角、焊条与工件间的距离是否在予先设定的范围内。

  24. This article will present the rational optimization of the hoisted point on a whole stand bar tower of single point hoisting , the length of the pole , and the angle of inclination to find its optimum association .

    采用单纯形法优选抱杆参数,对单点吊整立杆塔的吊点位置、抱杆的长度、倾角和固定钢绳绳角进行合理的优化,从而找到了最优组合。

  25. By survey and mapping , the authors ascertain that the main bodies consist of two bulky lens-shaped bags of ore with 340 ° direction of dip and 70 °~ 80 ° angle of inclination .

    经矿区调研填图,圈定出主矿体是由两条呈倾向340°、倾角70°~80°的巨型扁豆状矿囊组成。

  26. The results of the calculations show that the crytal can polymerize when there are the proper stacking distance ( d ≈ 0.55nm ) and angle of inclination (θ≈ 50 °) .

    计算表明,可聚合晶体应具有适当的堆积距d(~0.55nm)和倾斜角θ(~50°)。

  27. The finite element software introduced the bit and established anisotropy of series of angle of inclination formation rock in air drilling . Investigate the mechanism of interaction between bit and formation rock and the procedure of PDC bit breaking rock .

    建立了空气钻井中钻头钻进不同地层倾角地层岩石的动态过程的三维有限元仿真模型,并对PDC钻头破岩的过程以及钻头与岩石的相互作用机理进行了研究。

  28. According to the degree in which the original ground surface has been denuded , the magnitude and the angle of inclination of the major principal stress can be calculated ( such as the magnitude of the intermediate principal stress ) .

    根据原始地面遭剥蚀的程度,可以大致地估算最大主应力和中间主应力的量值和方向;

  29. We quantitatively analyze the casing damage , present the deformation of casing with the change of relative position of stratum and study the angle of inclination of stratum , the pressure of stratum , the size of soaked area and the hydration of marl .

    以地层的相对错动表示套损变形情况,研究了地层倾角、地层压力、浸水域大小和泥岩水化情况改变对套损的影响。

  30. By means of the analysis of grinding technological parameters for non-blade reamer , this paper provides calculation formula for grinding radial feed and angle of main shaft inclination .

    通过对无刃铰刀刃磨工艺参数进行分析,给出了刃磨径向进给尺寸&磨去弓形高h及工作台主轴倾斜角φ倾的计算公式。